FREE Standard Shipping*
Rugged and Discreet
The iUAP-AC-M has a rugged and durable IP65 rated housing, making it water and weatherproof. Heat and cold resistant, it's the perfect all-weather WiFi access point for wireless coverage in harsh indoor and outdoor settings. Discreet design allows easy setup anywhere.
Built for Work
Designed for industrial use, the iUAP-AC-M access point can be deployed in factories, warehouses, outdoor venues, or pool areas. Using Power over Ethernet , you can extend your network wherever needed and enjoy a coverage radius of up to 656 ft.
Dual-Band for Better Networking
The iUAP-AC-M access point broadcasts both 2.4GHz and 5GHz bands at the same time. Wireless devices can easily connect to the best band and get concurrent speeds of up to 1167Mbps. *Speeds will depend on real-world conditions.
MU-MIMO for Faster Connection
With MU-MIMO, the iUAP-AC-M access point supports many devices at the same time. Users will experience faster speeds and less lag while working or relaxing in your place of business.
Internet Where You Need It, Finally
The iUAP-AC-M access point can blanket those hard-to-reach indoor and outdoor areas with reliable WiFi. Don't let WiFi dead spots slow down your business. With faster speeds and greater coverage, you can keep multiple devices connected with no lag or interruptions.
The iUAP-AC-M Access Point is designed to cover both indoor and outdoor areas outside your network's range with reliable WiFi using Power over Ethernet. It provides dual-band speeds up to 1667Mbps. Equipped with two detachable 5dBi high-gain omnidirectional antennas, the access point offers a maximum WiFi coverage radius of 656ft. Antennas can be upgraded to customize the network. Powered by MU-MIMO, multiple devices can enjoy a fast, stable connection at once with less latency. IP65 rating guarantees the device enclosure for harsh conditions, making it perfect for industrial settings.
- 5 dBi high-gain omni-directional antennas
- Concurrent dual-band
- 656ft coverage radius
- MU-MIMO features allows multiple device connections
- Strong, stable signal with built in RF
- IP65 rated external housing
- DC power supply
The iUAP-AC-M extends the existing WiFi signal. It uses three main parts to do this:
- The outdoor antenna receives a WiFi signal
- The internet router receives this signal and broadcasts it to the A27 range extenders.
- The iUAP-AC-M range extenders amplify the signal and boost it up to 200m.
- Offices
- Factories
- Warehouses
- Outside venues
- Builders yards
| Product Information | |
|---|---|
| Model | iUAP-AC-M |
| Mounting | Pole Mounting and Wall Mounting |
| Dimensions | 194.7 x 83 x 42.1 mm |
| Hardware Specifications | |
| Frequency band | 2.4 GHz, 5 GHz |
| Wireless standards | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac |
| 2.4 GHz data rate | 1 - 300 Mbps |
| 5 GHz data rate | 6 - 867 Mbps |
| Ethernet port | 1*10/100/1000 Base-TX port |
| Button | 1*Reset |
| LED indicator | 1*SYS |
| Waterproof level | IP65 |
| Lightning protection | 6000 V |
| Max. power consumption | 11.5 W (Full-load) |
| Power supply standard | IEEE 802.3af/at & 24V, 0.5A Passive PoE |
| Antenna | 2*5dBi, RP-SMA Connector |
| 2.4 GHz Max. output power | 26 +/- 1.5 dBm |
| 5 GHz Max. output power | 26 +/-1.5 dBm |
| 802.11b RX sensitivity | -93 dBm |
| 2.4 GHz 802.11n (MCS7) RX sensitivity | -72 dBm |
| 5 GHz 802.11a RX sensitivity | -93 dBm |
| 5 GHz 802.11n (MCS7) RX sensitivity | -74 dBm |
| Software Specifications | |
| Operating modes | AP, Client+AP |
| Hide SSID | Supported |
| Max. No. of SSID |
2.4 GHz: 8 5 GHz: 4 |
| Max. connected clients |
2.4 GHz: 128 5 GHz: 256 |
| WEP | Supported |
| WPA-PSK | AES/TKIP |
| WPA2-PSK | AES/TKIP |
| WPA | Supported |
| WPA2 | Supported |
| Access control | MAC address-based |
| Adjustable power transmit | Supported |
| Frequency analysis | Supported |
| AP isolation | Supported |
| Connected client control | Supported |
| RSSI threshold | Supported |
| WMM | Supported |
| VLAN tagging for SSID | Supported |
| Transmission power | Adjustable by 1 dBm |
| LED indicator control | Supported |
| Diagnostics tool | Ping, Traceroute |
| Scheduled reboot | Supported |
| Reboot at specified interval | Supported |
| Management | Web UI |
| System logs | Supported |
| Firmware upgrade | Local and AC upgrade |
| Reboot | Local and AC reboot |
| Reset | Local and AC reset |
| Backup configuration | Supported |
| Restore configuration | Supported |
| Operating Environment | |
| Default login IP address | 192.168.0.254 |
| Default user name | admin |
| Default password | admin |
| Operating temperature | -10℃ - 45℃ |
| Operating humidity | (10% - 90%) RH, non-condensing |
| Storage temperature | -30℃ - 70℃ |
| Storage humidity | (10% - 90%) RH, non-condensing |
