Zinwave Unititvity 5000 Low-Band Remote Unit 305-1007
The Zinwave Unititvity 5000 Low-Band Remote Unit converts downlink signals from optical to RF and amplifies them. With impressive downlink power of up to 25 dBm, a single Low-Band RU delivers exceptional coverage. It also converts uplink signals from RF to optical and amplifies them, delivering them even stronger to the signal source.
Power port for this Secondary Hub is located in the rear.
The two N-Female connectors allow for the integration of two antennas, one for uplink and the other for downlink.
Low-Band RU covers all frequencies and technologies from 150-2700 MHz. Via fiber optic cable, it links to either the Primary or Secondary Hub. Place it above ceiling tiles or in inconspicuous locations.
Technical Specifications
| Unit Specifications | |
| SKU | 305-1007 |
| POWER CONNECTIVITY | 48 V DC POWER INPUT VIA PHOENIX 5.08 mm 2-WAY CONNECTOR; AWG 12-24 |
| FIBER CONNECTIVITY | SC/APC DUPLEX |
| ANTENNA CONNECTIVITY | SIMPLEX N-FEMALE CONNECTORS (TX AND RX) |
| OTHER CONNECTIVITY | ALARM RELAY: PHOENIX 5.08 mm 3-WAY |
| DIMENSIONS W / D / H (mm) | 8.1" (206) x 10.0" (253) x 2.2" (54.8) |
| WEIGHT | 6.2 LBS (2.8 Kg) |
| ELECTRICAL DEPENDING ON CONFIGURATION | 48 V DC / 0.5 A / 24 W (82 BTU/HR) |
| OPERATING TEMP AMBIENT NON-CONDENSING | -5 TO +50 °C (23 TO 122 °F) Note: -5 to +60C with less than 1 dB degradation |
| Approvals & Listings | |
| EUROPE | CE MARKED FOR RADIO EQUIPMENT DIRECTIVE 2014/53/EU AND ROHS DIRECTIVES 2011/65/EC |
| USA FCC | FCC CERTIFIED |
| CANADA | INDUSTRY CANADA CERTIFIED |
| SAFETY | IEC 60950-1; EN 60950-1; UL60950-1; UL2043, UL LISTED-E486578 |
| LASER SAFETY | IEC 60825-1:2007 |
| UPC | 810005964524 |
| PRODUCT DOWNLOADS | Technical Specifications |
| PRODUCT DOWNLOADS | Technical Specifications |
Recommended Add-ons
Zinwave Unitivity 5000 Optical Remote Unit 305-0007
- Converts Optical Signals to RF Signals
- Amplifies Uplink and Downlink Signals, Up to 20 dBm Output
- Works with Frequencies 150 to 2700 MHz
- Supports One Receiving and One Transmitting Antenna, N-Type Connectors
Zinwave Unitivity 5000 Public Safety Remote Unit 305-0007-R
- Converts Optical Signals to RF and Vice Versa
- Covers All Public Safety Frequencies from 150-2700 MHz
- Max Downlink Output of 23 dBm
- Supports two antennas
- NEMA4 Rated
Zinwave Unitivity 5000 Transport Module 305-0005
- Enables Fiber Connection Between Two Primary Hubs
- Installs in Primary Hubs, Max of 8 in Front or 4 in Back
- Perform the Job of a Service Module
- Designed to Be Used with Unititvity 5000 Primary Hubs
Zinwave Unitivity 5000 Service Module 305-0003
- Connects to RF Sources via Coax
- Installs in Unitivity Primary Hub
- Max of 4 Service Modules Per Primary Hub
- Two N-Female Connectors
- Hot Swappable Capabilities
Zinwave Unitivity 5000 Secondary Hub 305-1004
- Connects to Unitivity Primary Hub with Fiber
- Adds Coverage or Extends Reach of Optical Signals
- Handles Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality for RUs
- Rear Power Supply
Zinwave Unitivity 5000 Secondary Hub 305-0004
- Links to Unitivity Primary Hub via Two-Core Fiber Cable
- Extends Reach of Optical Signals or Adds Coverage
- Supports Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality
- Front Power Port
Zinwave Unitivity 5000 Public Safety IP66 Splice Tray 305-0008-R
- IP66 Tray to Protect from Dust and Water
- Attaches to Public Safety Remote Unit
- Equipped with Three Cable Connectors
Unitivity 5000 Optical Module 305-0002
- Installs in Unitivity Primary Hub
- Facilitates Connection to Secondary Hub or Remote Unit
- Max of 8 Optical Modules Per Primary Unit
- Passive Equipment
- No Electrical Power Required
- Hot Swappable Capabilities
Zinwave Uniwave 8000 2 Path Remote Unit 308-0007-2
- 2X2 MIMO Remote Unit, Four Antenna Ports
- Converts Optical to RF and Vice Versa
- Amplifies Uplink and Downlink Signals, Up to 25 dBm Output
- Covers Frequencies 150 MHz-5 GHz (4G, 5G, & Public Safety)
- Unintrusive, For Uniwave 8000 System