Zinwave Unitivity 5000 Public Safety IP66 Splice Tray 305-0008-R
The Public Safety IP66 Splice Tray is an IP66 enclosure meant to be added to the Unitivity 5000 Public Safety Remote Unit to protect against dust and water. Equipped with three cable entry points, it offers flexibility across fiber, power, and alarm configurations.
Technical Specifications
| Unit Specifications | |
| POWER CONNECTIVITY | 48 V DC POWER INPUT VIA PHOENIX 5.08 mm 2-WAY CONNECTOR; AWG 12-24 |
| FIBER CONNECTIVITY | SC/APC DUPLEX |
| ANTENNA CONNECTIVITY | SIMPLEX N-FEMALE CONNECTORS (TX AND RX) |
| TRAY CONNECTIVITY | 3 GLANDS WITH M16, M32, M20 SCREW THREADS (LEFT TO RIGHT FROM FRONT), BLANK PLATES/GLANDS PROVIDED, CABLE DIAMETERS RANGING BETWEEN 2 mm AND 21 mm CAN BE SUPPORTED WITH SUPPLIED GLANDS |
| OTHER CONNECTIVITY | ALARM RELAY: PHOENIX 5.08 mm 3-WAY WITH NORMALLY CLOSED AND NORMALLY OPEN CONNECTIONS |
| DIMENSIONS W / D / H (mm) | 8.1" (206) x 16.3" (415) x 2.2" (55) MEASUREMENTS INCLUDE SUPPLIED MOUNTING BRACKET AND IP66 ENCLOSURE |
| WEIGHT | 6.6 LBS (3 Kg) |
| ELECTRICAL DEPENDING ON CONFIGURATION | 48 V DC / 0.5 A / 24 W (82 BTU/HR) MINIMUM INPUT VOLTAGE IS 37 V |
| OPERATING TEMP AMBIENT NON-CONDENSING | -5 TO +50 °C (23 TO 122 °F) |
| Approvals & Listings | |
| EUROPE | CE MARKED FOR RADIO EQUIPMENT DIRECTIVE 2014/53/EU AND ROHS DIRECTIVES 2011/65/EC |
| USA FCC | FCC CERTIFIED |
| CANADA | INDUSTRY CANADA CERTIFIED |
| SAFETY | IEC 60950-1; EN 60950-1; UL60950-1, UL LISTED-E486578 |
| LASER SAFETY | IEC 60825-1:2007 |
| UPC | 810005964593 |
| PRODUCT DOWNLOADS | Technical Specifications |
Recommended Add-ons
Zinwave Unitivity 5000 Public Safety Remote Unit 305-0007-R
- Converts Optical Signals to RF and Vice Versa
- Covers All Public Safety Frequencies from 150-2700 MHz
- Max Downlink Output of 23 dBm
- Supports two antennas
- NEMA4 Rated
Zinwave Unitivity 5000 Secondary Hub 305-1004
- Connects to Unitivity Primary Hub with Fiber
- Adds Coverage or Extends Reach of Optical Signals
- Handles Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality for RUs
- Rear Power Supply
Zinwave Unitivity 5000 Secondary Hub 305-0004
- Links to Unitivity Primary Hub via Two-Core Fiber Cable
- Extends Reach of Optical Signals or Adds Coverage
- Supports Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality
- Front Power Port
Zinwave Unitivity 5000 Transport Module 305-0005
- Enables Fiber Connection Between Two Primary Hubs
- Installs in Primary Hubs, Max of 8 in Front or 4 in Back
- Perform the Job of a Service Module
- Designed to Be Used with Unititvity 5000 Primary Hubs
Zinwave Unitivity 5000 Service Module 305-0003
- Connects to RF Sources via Coax
- Installs in Unitivity Primary Hub
- Max of 4 Service Modules Per Primary Hub
- Two N-Female Connectors
- Hot Swappable Capabilities