About the Zinwave Unitivity 5000 Optical Module
The Zinwave Unitivity 5000 Transport Module enables a fiber connection between two Primary Hubs. A set of Transport Modules is required. One connects to the front of the first Primary Hub and the other one connects to the back of the second Primary Hub. Up to 8 Transport Modules can be deployed in the front or up to 4 in the rear. Simultaneous installation in both the front and rear on a single Primary Hub is not supported. Design resembles an Optical Module, but with internal hardware differences to permit it to also perform the job of a Service Module.
Technical Specifications
| Unit Specifications | ||
| SKU | 305-0004 | |
| POWER CONNECTIVITY | 48 V DC POWER OUTPUT VIA PHOENIX 5.08mm 2-WAY CONNECTOR; AWG 12-24 | |
| FIBER CONNECTIVITY | SC/APC DUPLEX | |
| OTHER CONNECTIVITY | ALARM RELAY (DB-9F) | |
| DIMENSIONS W / D / H (mm) | 17.5” (444) x 17.1” (435) x 1.7” (43.7) (1RU) | |
| WEIGHT | 15 LBS (6.8 Kg) | |
| OPERATING TEMP AMBIENT NON-CONDENSING | -5 TO +45ºC (23 TO 113ºF) | |
| Approvals & Listings | ||
| EUROPE | CE MARKED FOR RADIO EQUIPMENT DIRECTIVE 2014/53/EU AND ROHS DIRECTIVES 2011/65/EC | |
| USA FCC | FCC CERTIFIED | |
| CANADA | INDUSTRY CANADA CERTIFIED | |
| SAFETY | IEC 60950-1; EN 60950-1; UL60950-1, UL LISTED-E486578 | |
| LASER SAFETY | IEC 60825-1:2007 | |
| UPC | 810005964494 | |
| PRODUCT DOWNLOADS |
Technical Specifications Data Sheet |
|
Recommended Add-ons
Zinwave Unitivity 5000 Service Module 305-0003
- Connects to RF Sources via Coax
- Installs in Unitivity Primary Hub
- Max of 4 Service Modules Per Primary Hub
- Two N-Female Connectors
- Hot Swappable Capabilities
Zinwave Uniwave 8000 Transport Module 308-0005
- Designed to Be Used with Uniwave 8000 Primary Hubs
- Establishes Fiber Connection Between Two Primary Hubs
- Creates UniTransfer Link
- Installs in Primary Hubs, Max of 4 in Back or 8 in Front
Zinwave Unitivity 5000 Secondary Hub 305-1004
- Connects to Unitivity Primary Hub with Fiber
- Adds Coverage or Extends Reach of Optical Signals
- Handles Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality for RUs
- Rear Power Supply
Zinwave Unitivity 5000 Optical Remote Unit 305-0007
- Converts Optical Signals to RF Signals
- Amplifies Uplink and Downlink Signals, Up to 20 dBm Output
- Works with Frequencies 150 to 2700 MHz
- Supports One Receiving and One Transmitting Antenna, N-Type Connectors
Zinwave Unitivity 5000 Secondary Hub 305-0004
- Links to Unitivity Primary Hub via Two-Core Fiber Cable
- Extends Reach of Optical Signals or Adds Coverage
- Supports Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality
- Front Power Port
Zinwave Unitivity 5000 Public Safety Remote Unit 305-0007-R
- Converts Optical Signals to RF and Vice Versa
- Covers All Public Safety Frequencies from 150-2700 MHz
- Max Downlink Output of 23 dBm
- Supports two antennas
- NEMA4 Rated
Zinwave Unititvity 5000 Low-Band Remote Unit 305-1007
- Converts Optical to RF and Vice Versa
- Amplifies Uplink and Downlink Signals, Up to 25 dBm Output
- Links to Primary or Secondary Hub via Fiber, Supports Two Antennas
- Covers all frequencies from 150-2700 MHz
- Unintrusive, For Unitivity 5000 System
Unitivity 5000 Optical Module 305-0002
- Installs in Unitivity Primary Hub
- Facilitates Connection to Secondary Hub or Remote Unit
- Max of 8 Optical Modules Per Primary Unit
- Passive Equipment
- No Electrical Power Required
- Hot Swappable Capabilities
Zinwave Unitivity 5000 Public Safety IP66 Splice Tray 305-0008-R
- IP66 Tray to Protect from Dust and Water
- Attaches to Public Safety Remote Unit
- Equipped with Three Cable Connectors