Zinwave Uniwave 8000 1 Path Remote Unit 308-0007-1
The Zinwave Uniwave 8000 1 Path Remote Unit converts downlink signals from optical to RF and amplifies them for mobile devices. With max downlink power of 25 dBm, a single 1 Path RU delivers exceptional coverage.
The 1 Path RU also converts uplink signals from RF to optical and amplifies them, delivering them even stronger to the signal source. It handles frequencies 150 MHz to 5 GHz.
This is a SISO, Single Input Single Output, RU. It supports one uplink antenna and one downlink antenna.
Via fiber optic cable, 1 Path RU links to either the Primary or Secondary Hub. It can be placed above ceiling tiles or in inconspicuous locations.
Technical Specifications
| Unit Specifications | |
| SKU | 308-0007-1 |
| POWER CONNECTIVITY | 48 V DC POWER INPUT VIA PHOENIX 5.08mm 2-WAY CONNECTOR; AWG 12-24 |
| FIBER CONNECTIVITY | LC/APC DUPLEX |
| ANTENNA CONNECTIVITY | SIMPLEX N-FEMALE CONNECTORS (TX AND RX) |
| OTHER CONNECTIVITY | ALARM RELAY: PHOENIX 5.08 mm 3-WAY |
| DIMENSIONS W / D / H (mm) | 1X1 - 8.9” (225) x 10.8” (275) x 3” (75) |
| WEIGHT | 1X1 - 8.8 LBS (4 KG) |
| ELECTRICAL DEPENDING ON CONFIGURATION | 48 V DC / 1A / 50W (170 BTU/HR) Each Path |
| OPERATING TEMP AMBIENT NON-CONDENSING | -5 C to +45 C |
| Approvals & Listings | |
| EUROPE | CE MARKED FOR RADIO EQUIPMENT DIRECTIVE 2014/53/EU AND ROHS DIRECTIVES 2011/65/EC |
| USA FCC | FCC CERTIFIED |
| CANADA | INDUSTRY CANADA CERTIFIED |
| SAFETY | IEC 60950-1; EN 60950-1; UL62368-1; UL2043 |
| LASER SAFETY | IEC 60825-1:2007 |
| ENVIRONMENT | IP20 Rated |
| UPC | 810005964432 |
| PRODUCT DOWNLOADS | Technical Specifications |
Recommended Add-ons
Zinwave Uniwave 8000 2 Path Remote Unit 308-0007-2
- 2X2 MIMO Remote Unit, Four Antenna Ports
- Converts Optical to RF and Vice Versa
- Amplifies Uplink and Downlink Signals, Up to 25 dBm Output
- Covers Frequencies 150 MHz-5 GHz (4G, 5G, & Public Safety)
- Unintrusive, For Uniwave 8000 System
Zinwave Uniwave 8000 4 Path Remote Unit 308-0007-4
- 4x4 MIMO Remote Unit, Eight Antenna Ports
- Converts Optical to RF and Vice Versa
- Amplifies Uplink and Downlink Signals, Up to 25 dBm Output
- Covers Frequencies 150 MHz-5 GHz (4G, 5G, & Public Safety)
- Unintrusive, For Uniwave 8000 System
Zinwave Uniwave 8000 Secondary Hub 308-0004
- Links to Uniwave Primary Hub via Two-Core Fiber Cable
- Extends Reach of Optical Signals or Adds Coverage
- Supports Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality
Zinwave Uniwave 8000 Transport Module 308-0005
- Designed to Be Used with Uniwave 8000 Primary Hubs
- Establishes Fiber Connection Between Two Primary Hubs
- Creates UniTransfer Link
- Installs in Primary Hubs, Max of 4 in Back or 8 in Front
Zinwave Unitivity 5000 Optical Remote Unit 305-0007
- Converts Optical Signals to RF Signals
- Amplifies Uplink and Downlink Signals, Up to 20 dBm Output
- Works with Frequencies 150 to 2700 MHz
- Supports One Receiving and One Transmitting Antenna, N-Type Connectors
Zinwave Unitivity 5000 Public Safety Remote Unit 305-0007-R
- Converts Optical Signals to RF and Vice Versa
- Covers All Public Safety Frequencies from 150-2700 MHz
- Max Downlink Output of 23 dBm
- Supports two antennas
- NEMA4 Rated
Zinwave Uniwave 8000 Point of Interface (POI) 304-0003
- Handles Up to 8 Signal Sources
- Conditions RF Signals, Covers 600-5000 MHz
- 16 N-Type Input Ports, Up 37 dBm Power Each
- WAN and LAN Ethernet Ports
- Rack-Mounted
Zinwave Unititvity 5000 Low-Band Remote Unit 305-1007
- Converts Optical to RF and Vice Versa
- Amplifies Uplink and Downlink Signals, Up to 25 dBm Output
- Links to Primary or Secondary Hub via Fiber, Supports Two Antennas
- Covers all frequencies from 150-2700 MHz
- Unintrusive, For Unitivity 5000 System
Zinwave Unitivity 5000 Transport Module 305-0005
- Enables Fiber Connection Between Two Primary Hubs
- Installs in Primary Hubs, Max of 8 in Front or 4 in Back
- Perform the Job of a Service Module
- Designed to Be Used with Unititvity 5000 Primary Hubs