Zinwave Uniwave 8000 Point of Interface (POI) 304-0003
The Uniwave 8000 Point of Interface (POI) conditions RF signals into the Zinwave Active DAS from up to 8 signal sources (i.e. Base Transceiver Stations).
It handles frequencies 600-5000 MHz and connects to the Service Module in the rear of the Uniwave Primary Hub. Via the dual DL and UL ports, one POI can be linked to two Primary Hubs
POI has 16 built-in N-Type input ports, 8 duplex and 8 simplex, with max power of 37 dBm each. It also has one WAN and one LAN ethernet port. Chassis is 19” and rack mountable.
Technical Specifications
| Unit Specifications | |
| SKU | 304-0003 |
| POWER CONNECTIVITY | 110-240VAC, 50-60Hz |
| RF CONNECTIVITY | N Type Connectors |
| SIZE | 2 RU - 19" Rack Mount |
| ELECTRICAL DEPENDING ON CONFIGURATION | 20W |
| OPERATING TEMP AMBIENT NON-CONDENSING | -5 C to +45 C |
| System Connections | |
| RF Frequency Range | 600 - 5000 MHz |
| Fixed Insertion Loss DL/UL Variable Insertion Loss DL/UL |
22.5 + 1.6 X FGHz dB 0 - 30 dB |
| Attenuation Accuracy | +/-2 dB |
| Input Third-Order Intercept (IIP3) | +70 dBm |
| Maximum Input Power per Port | + 37 dBm |
| Approvals & Listings | |
| EUROPE & UKCA | EN 55032:2015/A11:2020, EN 55035:2017/A11:2020, EN IEC 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A1:2019+A2:2021 |
| USA FCC | 47 CFR FCC Pt 15 Subpt B with ANSI C63.4a-2017 ICES-003 Issue 7 |
| SAFETY | IEC 62368-1:2018, EN 62368-1:2014:2017, and EN IEC 62368-1:2020+A11:2020 |
| ENVIRONMENT | IP20 Rated |
| UPC | 810005964722 |
| PRODUCT DOWNLOADS | Technical Specifications |
Recommended Add-ons
Zinwave Uniwave 8000 Secondary Hub 308-0004
- Links to Uniwave Primary Hub via Two-Core Fiber Cable
- Extends Reach of Optical Signals or Adds Coverage
- Supports Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality
Zinwave Uniwave 8000 Transport Module 308-0005
- Designed to Be Used with Uniwave 8000 Primary Hubs
- Establishes Fiber Connection Between Two Primary Hubs
- Creates UniTransfer Link
- Installs in Primary Hubs, Max of 4 in Back or 8 in Front
Zinwave Uniwave 8000 2 Path Remote Unit 308-0007-2
- 2X2 MIMO Remote Unit, Four Antenna Ports
- Converts Optical to RF and Vice Versa
- Amplifies Uplink and Downlink Signals, Up to 25 dBm Output
- Covers Frequencies 150 MHz-5 GHz (4G, 5G, & Public Safety)
- Unintrusive, For Uniwave 8000 System
Zinwave Uniwave 8000 4 Path Remote Unit 308-0007-4
- 4x4 MIMO Remote Unit, Eight Antenna Ports
- Converts Optical to RF and Vice Versa
- Amplifies Uplink and Downlink Signals, Up to 25 dBm Output
- Covers Frequencies 150 MHz-5 GHz (4G, 5G, & Public Safety)
- Unintrusive, For Uniwave 8000 System
Zinwave Uniwave 8000 1 Path Remote Unit 308-0007-1
- SISO Remote Unit, Two Antenna Ports
- Converts Optical to RF and Vice Versa
- Amplifies Uplink and Downlink Signals, Up to 25 dBm Output
- Covers Frequencies 150 MHz - 5 GHz (4G, 5G, & Public Safety)
- Unintrusive, For Uniwave 8000 System
Zinwave Unitivity 5000 Service Module 305-0003
- Connects to RF Sources via Coax
- Installs in Unitivity Primary Hub
- Max of 4 Service Modules Per Primary Hub
- Two N-Female Connectors
- Hot Swappable Capabilities
Zinwave Unitivity 5000 Transport Module 305-0005
- Enables Fiber Connection Between Two Primary Hubs
- Installs in Primary Hubs, Max of 8 in Front or 4 in Back
- Perform the Job of a Service Module
- Designed to Be Used with Unititvity 5000 Primary Hubs
Zinwave Unitivity 5000 Secondary Hub 305-1004
- Connects to Unitivity Primary Hub with Fiber
- Adds Coverage or Extends Reach of Optical Signals
- Handles Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality for RUs
- Rear Power Supply
Zinwave Unitivity 5000 Secondary Hub 305-0004
- Links to Unitivity Primary Hub via Two-Core Fiber Cable
- Extends Reach of Optical Signals or Adds Coverage
- Supports Up to 8 Remote Units
- Power Supply Unit (PSU) Functionality
- Front Power Port